Pond Pump
Hozelock Aquaforce 4000
Model: Aquaforce 4000
A 50 W submersible solids‑handling pond pump from Hozelock delivering up to 4,000 l/h with a maximum head of 2.5 m. Pump‑only unit with removable inlet guard, clip‑in mesh tray and IPX8 protection.
About Hozelock Aquaforce 4000
The Hozelock Aquaforce 4000 (model 1582) is a submersible, solids‑handling pond pump intended for powering waterfalls, filters and fountain accessories. Manufacturer specifications list a maximum flow of 4,000 litres per hour and a maximum head of 2.5 metres. The pump is a fixed‑power unit rated at 50 watts and is supplied as a "Pump Only" product (no filter media or UVC). The unit is fitted with a removable inlet guard / wildlife protection system and a clip‑in fine mesh tray; the inlet arrangement allows adjustment of the strainer hole size (manufacturer references 6 mm / 10 mm and a WPS reducing to 2 mm). A multi‑step hosetail is supplied to accept 25 mm, 32 mm and 40 mm hose and the outlet also accepts 3/4" BSP screw‑thread fountain fittings. The instruction booklet and installation drawing describe the hosetail, ball‑joint and outlet adaptor arrangements and show how to cut the hosetail for the chosen hose diameter. Key operational limits given by Hozelock include a maximum permitted submersion depth of 2.5 metres, a maximum permitted water temperature of 35 °C and an ingress protection rating of IPX8. The small Aquaforce models (including the 4000) are not listed as amphibious. The pump includes automatic thermal overload protection (automatic cut‑out with reset procedure described in the instructions). Manufacturer documentation does not state cable length, physical dimensions, weight, a flow‑at‑head curve, or any manufacturer‑recommended pond/fish/koi capacities for this pump; those items are therefore not specified here.
Best for
Solids‑handling pond water circulation and powering waterfalls, filters and fountain accessories where a 4,000 l/h pump with 2.5 m head is required.
Things to consider
Manufacturer documentation reviewed does not provide cable length, physical dimensions, weight, flow‑at‑head performance curve or any manufacturer‑stated pond/fish/koi capacities for this model. Warranty excludes the rotor assembly. No amphibious operation for this small model. All values are taken from Hozelock product pages and the 1580/1581/1582 instruction booklet; where Hozelock does not state a figure, the field is left null rather than inferred.
Installation
Follow the Hozelock instruction booklet for fitting the multi‑step hosetail, ball‑joint and outlet adaptor and for cutting the hosetail to the chosen hose diameter. Do not exceed the manufacturer limits: maximum submersion depth 2.5 m and maximum water temperature 35 °C. This small Aquaforce model is not amphibious; install and operate per the supplied instructions. Thermal overload protection and reset procedures are described in the manual.
Maintenance
The inlet guard and clip‑in fine mesh tray are removable for cleaning—refer to the instruction booklet for access and recommended cleaning procedures. The rotor assembly is excluded from the guarantee; service or replacement details are given by the manufacturer.
Safety
Observe the maximum water temperature (35 °C) and do not run the pump dry. The pump includes automatic thermal overload protection. Follow the electrical and safety guidance in the Hozelock instruction booklet when installing and maintaining the unit.