Air Pump
AquaForte AP 45
Model: AP 45
External AquaForte AP 45 aeration pump (SC452). Manufacturer lists 25 W power and a maximum head of 3.0 m; first-party sources give conflicting published flow and outlet-size values.
About AquaForte AP 45
The AquaForte AP 45 (SC452) is an external aeration/air pump intended for pond aeration. AquaForte documents list a rated power consumption of 25 W and a maximum head (maximum operating pressure expressed as metres of water) of 3.0 m. AquaForte publishes flow figures in litres per minute for this model, but first‑party materials differ: the product page and catalogue show 47 L/min at 1 m while the AP‑series manual lists 45 L/min; the product/brochure also shows 24 L/min at 2 m. AquaForte’s materials also include a stated weight (2.9 kg) and a noise rating of 33 dB for this model. The product page describes a supplied hose tail size of 9 mm for AP‑series models AP‑35 to AP‑100, while the brochure table lists an output ('Ausgang') of 16.5 mm for the AP 45—these two first‑party statements conflict. The AP series manual describes a rainwaterproof structure and an automatic power‑off protection feature when membranes are worn out. AquaForte does not provide cable length, explicit IP rating, pond-capacity guidance, warranty period, or detailed outlet-count information for this exact model in the supplied first‑party documents.
Things to consider
AquaForte first‑party documents conflict on two key numeric items for the AP 45: published flow (47 L/min at 1 m on product page & brochure vs 45 L/min in the AP‑series manual) and outlet/hose sizing (product page text states a 9 mm hose tail for AP‑35…AP‑100 while the brochure table lists an output of 16.5 mm for AP 45). Because these AquaForte sources disagree and no single value is definitive, the structured maxFlowLph and a single outlet size are left null and both manufacturer statements are reported in specifications. Several items are not stated in the supplied first‑party materials: cable length, IP rating number, overall external dimensions, warranty period, and any manufacturer pond‑capacity guidance.
Installation
Follow the AP‑series manual: the pump is an external unit and must be kept dry (not immersed). Observe local mains voltage/frequency requirements, ensure the appliance is earthed where required, form a cable loop to prevent water running into the plug, and do not carry the pump by the cable. See the AquaForte AP‑series manual for the full manufacturer installation and safety instructions.
Maintenance
Manufacturer documentation notes replaceable membranes and an automatic power‑off protection when membranes are worn out. The manual does not provide specific replacement intervals; follow the AP‑series manual guidance for inspection and membrane replacement procedures.
Safety
Keep the unit dry and do not immerse. Ensure correct mains connection and earthing where applicable. Do not carry the pump by its cable. Refer to the AP‑series manual for complete safety and handling instructions.